Safety Sensors

Garage Door Safety Sensors

The Photo-Eyes Are a Required Safety Feature — Not Optional

Every garage door opener manufactured after 1993 is code-required to have a pair of photo-eye safety sensors, mounted near the floor on either side of the track, that stop the door from closing on something in its path. When they’re misaligned or dirty, the door either reverses the instant it starts closing or refuses to close at all. Sometimes it’s a quick adjustment; sometimes the sensor itself has failed and needs replacing. Here’s what’s actually going on and how we fix it.

Sensor Diagnosis

Alignment, Cleanliness & Response

Alignment

The two sensors have to point directly at each other across the opening. Even a slight bump to one bracket throws off the beam and the door won’t close.

Cleanliness & Obstruction

Dust, cobwebs, or anything sitting in the beam’s path reads as an obstruction and stops the door from closing.

Reverse Response

When the beam is broken while the door is closing, it should reverse immediately. We test this along with the opener’s force settings.

Opener Force Settings & Auto-Reverse (UL 325)

Closing force has to be set so the door reverses when it meets resistance at the ground — a UL 325 code requirement. Over-tightened force settings are how doors injure people and damage vehicles, so we test and set this correctly on every visit.

Why This Isn’t Optional

These Two Systems Keep the Door From Closing on Someone

The photo-eye sensors and the opener’s auto-reverse force setting are what stand between a normal close cycle and the door coming down on a person, pet, or vehicle. Both are checked as a standard part of every diagnostic visit and full tune-up — not an upsell, just a safety check we run every time we’re on site.

Pricing

What Sensor Repair Costs

Most sensor issues are a misalignment or a dirty lens — a quick adjustment included in a standard service call. If the sensor unit itself has failed (cracked housing, water damage, dead eye), it needs to be replaced rather than adjusted.

Safety Sensor Realignment

Cleaning, realignment, and a reverse-response test.

Included inService Call

Safety Sensor Replacement

The sensor unit itself has failed and needs to be swapped, not just re-aimed.

Flat rate per door$100

Full Tune-Up & Safety Inspection

Sensor check plus the full 20-point inspection, lubrication, and opener force/auto-reverse test.

Flat rate per door$100

Not Sure What’s Wrong?

Start with a diagnostic visit if the door’s behaving oddly for reasons beyond the sensors.

Diagnostic from$59

Not Sure What’s Wrong? Start Live Pricing.

Live Pricing walks you through your door’s symptoms step by step and gives you an itemized estimate before anyone shows up. No sales pressure, no guessing.

Get My Price →
Service Area

Serving Charlottesville & Central Virginia

Grossmann Garage Door serves customers within 50 miles of Charlottesville — covering Albemarle, Augusta, Rockingham, Madison, Greene, Orange, Louisa, Fluvanna, Nelson, and Buckingham counties as well as the independent cities of Waynesboro, Staunton, and Harrisonburg.

Communities we regularly serve: Crozet, Earlysville, Ivy, Keswick, Scottsville, Gordonsville, Elkton, Stanardsville, Ruckersville, Barboursville, Orange, Louisa, Mineral, Palmyra, Lovingston, Nellysford, Stuarts Draft, Fishersville, Verona, Bridgewater, Dayton, Grottoes, Weyers Cave, Culpeper, Madison, and more. If you’re within roughly 50 miles of downtown Charlottesville, we’ll come to you.

Why won't my garage door close all the way?
The most common cause is misaligned or dirty photo-eye safety sensors near the floor on either side of the track. If the beam between them is broken or blocked, the opener won't let the door close.
Are garage door safety sensors required by law?
Yes. Photo-eye sensors are code-required on every opener manufactured after 1993. Openers must also have their closing force set so the door reverses when it meets resistance at the ground, per UL 325 — over-tightened force settings are how doors injure people and damage vehicles.
How much does it cost to fix a garage door sensor?
Realignment is usually a quick adjustment, included in a standard service call rather than billed separately. If it turns out to be something more than alignment, we'll walk you through it on site before doing any work.
My door reverses right after it starts closing. Is that the sensors?
Likely, yes — that's the classic symptom of a misaligned or obstructed photo-eye. It could also be an opener force setting that's too sensitive. We test both together, since they work as one safety system.
(434) 206-9500EmailLive Pricing